An 811 locate is a free request that tells member utilities to mark their own buried lines in the area you plan to dig. It does not cover private lines that the property owner owns, and the marks are only approximate. Private utility locators and ground-penetrating radar (GPR) fill in the gaps, and each has limits. For a precise answer on a critical line, the standard method is to expose it by careful excavation.
What an 811 locate does
In Florida, Sunshine 811 receives your request and passes it to its member utilities. Each member then responds. Sunshine 811 lists the response statuses as marked, unmarked or clear. The notice must come at least two full business days before digging, and a notice stays valid for 30 calendar days under the statute. For the full rules, see Florida 811 rules and timing.
What you get:
- Paint or flags on the ground, following the APWA uniform color code.
- Marks that show the approximate location of the buried line, in the area described on your ticket.
- A tolerance zone, which the statute defines as 24 inches on each side of a marked facility's outer surface. Inside it, the excavator must use hand digging, potholing, soft digging, vacuum excavation or a similar careful method.
- Marks that Sunshine 811 says are valid for 30 calendar days.
What 811 does not cover
This is where most surprises come from.
- Private lines. Sunshine 811 says members mark only the utilities they own and maintain. Private utilities, owned and maintained by the property owner, are not located when you call 811. The property owner or excavator arranges and pays for private locating.
- Exact position and depth. The marks are approximate. Sunshine 811 does not give depth.
- Non-members. The Common Ground Alliance notes that a one-call center notifies only its members, so lines owned by non-members are not marked.
- Facilities outside the definition. Florida's definition of an underground facility excludes storm drainage systems, and has limits for some propane and petroleum systems. Check the current definition in Chapter 556.
- Clear does not mean empty. Sunshine 811 says a clear response does not rule out facilities, which may be private.
Common private lines on a Miami-Dade property include the water service line past the meter, the sewer lateral on your side, septic components, irrigation, landscape lighting, pool plumbing and electrical, and buried feeders to outbuildings. A commercial site may add fire service lines, private drainage and site lighting. Which of these a particular utility marks depends on who owns them, so read the responses on your ticket.
Private utility locating
Private locators are companies that find and mark lines the 811 members do not. Sunshine 811 keeps a list of private locate companies, notes the list is not complete, and does not describe how the firms are vetted.
Typical tools include:
- Electromagnetic (EM) locators. A receiver picks up a signal on a metal pipe or cable. The signal comes from the line's own current or from a transmitter connected to it, often through a cleanout, valve or tracer wire. SHRP2 research notes that EM-based tools cannot detect non-metallic utilities without a tracer wire.
- Sondes and push cameras. A small transmitter on a camera head lets the locator trace a drain or sewer from above ground.
- GPR. Described below.
- Potholing. Some locators also offer potholing, which is digging a small test hole, often with vacuum equipment, to see the line.
Ask the locator what they can and cannot find on your site, what accuracy they claim, how they mark the result, and whether they deliver a sketch or map.
Ground-penetrating radar
GPR sends radio-frequency energy into the ground and records reflections where materials change. FHWA describes the results as often appearing as hyperbola shapes in the scan data.
What it can do:
- Find metallic utilities reliably.
- Find non-metallic pipes such as PVC when they contrast enough with the surrounding soil. That makes it useful where EM tools cannot trace a plastic line with no tracer wire.
- Show buried features other than utilities, which the operator must interpret.
- Provide results the operator can read and mark in the field.
What it cannot do reliably:
- Work well in clay or wet soil. FHWA says moisture and clay weaken the signal, and the SHRP2 report says GPR does not work well in clay soils. South Florida's shallow water table is a reason to ask any operator what they expect on your site. The county's own septic vulnerability study (2018) models groundwater within 42 inches of the surface at times for a large share of septic parcels.
- Detect concrete pipe consistently. FHWA says the signal is often weak because concrete is similar to soil in its electrical properties.
- See beneath a metal object or layer.
- Give you a result without skilled interpretation. FHWA notes that collecting and interpreting the data takes significant expertise.
- Trade off depth and detail. A given antenna favors one or the other.
FHWA describes GPR as a complement to other methods, not a stand-alone answer.
Comparison
| Method | What it finds | Main limits |
|---|---|---|
| 811 locate | Member utilities' own lines, approximately | Private lines, exact depth, non-members |
| Electromagnetic locating | Metal lines and traced tracer wire | Non-metallic lines with no tracer wire |
| GPR | Metal and some non-metal lines, voids, objects | Wet or clay soils, interpretation, weak concrete signal |
| Potholing or vacuum excavation | Exact position, depth, size and material of one spot | Only the spots you dig |
Why a combined approach is used
FHWA's description of subsurface utility engineering (SUE) lays out four quality levels, tied to the ASCE 38-22 standard:
- QL-D: records and recollections only.
- QL-C: surveying visible features like manholes and valve boxes, then matching them to records.
- QL-B: surface geophysical methods, such as EM and GPR, to designate lines.
- QL-A: nondestructive vacuum excavation to expose a line and measure it precisely.
Few homeowner jobs need formal SUE. The idea still helps. Records and 811 marks give you a first picture, a private locator or GPR adds detail, and a test hole confirms the one spot that matters, such as where a new line crosses an existing one.
Questions people ask
If 811 marked my yard, can I dig anywhere?
No. The marks are approximate, and they apply only inside the ticket area. Private lines may be unmarked, and Sunshine 811 advises calling before every dig.
Does GPR find every pipe?
No. Wet or clay soil, deep lines, and concrete pipe can limit it. It works best alongside other methods.
Who pays for private locating?
Sunshine 811 says private locating is arranged and paid for by the property owner or excavator.
What if I hit a line?
Stop digging. Sunshine 811 advises contacting the owning utility using the contact information on your ticket, and calling 911 if gas or a hazardous substance escapes. The statute also requires notice to the operator after damage.
Check before you decide
- Call 811 first and read every response on your ticket.
- List the private lines on the property, and ask previous owners or your contractor for plans.
- Hire a private locator or GPR operator when private lines or non-metallic pipe may be in the way.
- Confirm exposed depth with a test hole at critical crossings.
- Photograph and record marks, and keep locator reports.
A licensed contractor can coordinate locating and excavation for site work. See underground utilities.
