
Service
Roofing
Installation, replacement and repair of roof systems for residential and commercial properties.
What is included
- Roof installation
- Roof replacement, including removal of existing materials
- Roof repair
- Residential and commercial properties
Roof systems
- TPO
- Metal
- Tile
- Shingle
- Flat roofs
A licensed roofing contractor, backed by other trades
Roofing is one of the five trades covered by our Florida contractor licenses.
Roof work often touches other scopes, such as rooftop HVAC equipment or structural repairs. Because we also hold HVAC and general contractor licenses, those scopes can be handled within the same project.
Preliminary roof estimates
Enter your address and we measure your roof from satellite roof data, then you choose the material and get a preliminary estimate. Estimates are never final quotes: final pricing is confirmed after a site review.
Get a roofing estimateFinancing available Ask us about options
Owens Corning Preferred Contractor: what it means for your roof
Related past performance
Residential Roofing
Miami, FL · December 2025 · Prime Contractor
Removal of existing materials and installation of a new metal roof system for durability and weather resistance.
Guides for this service
Owens Corning Preferred Contractor: what it means
What it means when a roofer is an Owens Corning Preferred Contractor, what it does not mean, and the questions to ask before you sign.
5 min read
Owens Corning roof warranties, explained simply
The general difference between a shingle warranty and a roofing system warranty, why registering it matters, and what to ask for in writing.
4 min read
Duration shingles and SureNail: what they are
What Owens Corning Duration shingles and SureNail Technology are, what the nailing zone is, and why correct nailing matters, from official pages only.
4 min read
The Total Protection Roofing System, part by part
The parts of the Owens Corning Total Protection Roofing System, what each one does, and why mixing in any other part can affect the roof and its warranty.
4 min read
South Florida roofs: what to ask on wind and permits
What to ask your roofer in Miami-Dade and Broward about wind design, the permit and the product approval (NOA), using official county and state pages.
5 min read
Shingle recycling: what happens to your old roof
What can happen to the old shingles when a roof is replaced, what Owens Corning says about recycling them, and what to ask your contractor.
4 min read
How to compare roofing proposals: a checklist
What a good roofing proposal should include: product line, layers, flashing and vents, permit, warranty, cleanup, change orders, license and insurance.
4 min read
Architectural vs three-tab shingles: how to read the spec sheet
What exposure, coverage per square, wind rating, algae resistance and warranty mean on a shingle data sheet, with Owens Corning examples and Florida approvals.
7 min read
Cool roof shingles in South Florida: what reflective granules do
What solar reflectance and emittance mean, what Owens Corning lists for Duration COOL, and what the DOE and the Florida energy code say about cool roofs.
6 min read
Impact-resistant shingles: Class 3 vs Class 4 explained
What the UL 2218 impact test measures, how Class 3 and Class 4 differ, which Owens Corning lines list each, and what to ask your insurer in writing.
7 min read
Frequently asked questions
Which roof systems do you work with?
TPO, metal, tile, shingle and flat roof systems.
Do you work on both residential and commercial roofs?
Yes. We perform residential and commercial roofing work.
What does a roof replacement involve?
It typically includes removing the existing materials and installing the new roof system. Our Residential Roofing project in Miami, for example, replaced an existing roof with a new metal system.
Is an online roof estimate a final price?
No. Estimates from our roof tool are preliminary and subject to inspection and actual project data. A firm price is confirmed in a formal proposal after a site review.
How we work
Short videos that show, step by step, how a roof is done right.
How a professional repairs a roof
Eight steps, from finding where the water really gets in to the photos and papers at the end.
Video: 1:20 · on-screen text and music, no voice
See the steps as text
- Find the real source Water rarely drips where it enters. We trace it from the stain back to the entry point.
- Protect first We cover the area and photograph the damage before touching anything.
- Remove the damaged layer Only the damaged shingles come off, so the rest of the roof stays untouched.
- Check the deck Wet or soft wood is cut out and replaced.
- Rebuild, layer by layer Underlayment, drip edge and new shingles, installed to the manufacturer's instructions and Florida code.
- Seal the details Flashing around pipes and vents is where most leaks start.
- Check ventilation, then test Air must flow under the roof. Then the repair is tested.
- Photos and paperwork You receive photos of the work, the permit when required, and the product documents.
General guide. Do not climb on your roof: call a professional. Work follows the manufacturer's instructions and local approvals.
How a new roof is installed
The steps of a new roof, from the old one coming off to the final check.
Video: 2:00 · on-screen text and music, no voice
See the steps as text
- Permit and plan Before work starts: the permit, the product choice and the schedule.
- Protect, then tear off The property is covered and the old roof comes off, down to the deck.
- Repair the deck Wet or soft wood is replaced so the new roof sits on solid ground.
- Edge and water barrier Drip edge and underlayment go on first: the layer that keeps water out.
- Shingles, row by row Starter strip first, then each row nailed in the right zone, to the manufacturer's instructions.
- Flashing and vents Pipes, vents and edges are flashed and sealed, where most leaks start.
- Ridge cap The ridge is capped to close the top of the roof.
- Clean up and sweep Debris is removed and a magnet sweep picks up loose nails.
- Final inspection and papers We check the work. You receive photos of the finished work, the permit closing and inspection when required, and the product documents and warranty registration when applicable.
General guide. Do not climb on your roof: call a professional. Work follows the manufacturer's instructions and local approvals.
Total Protection Roofing System: comfort, beauty and protection for your home
Owens Corning video
It plays from YouTube, and loads only when you press play.
- Materials from a leading brand
- One accountable contractor from start to finish
- Work done to the manufacturer's instructions and the Florida code

Let's build together
Your next project starts here
Tell us about your project and request a proposal, or get a preliminary roof estimate first.