Florida contractor license numbers begin with letters that show the category: CGC is a certified general contractor, CRC a certified residential contractor, CCC a certified roofing contractor, and so on. A "C" prefix means certified for work statewide, and an "R" prefix means registered for work only in the places where the contractor met local requirements. You can look up a license on the state licensing site (DBPR) and, for Miami-Dade local licenses, through the county's Contractor Licensing Section.
This article focuses on what the codes mean and what a lookup can and cannot tell you. For the full hiring checklist, including insurance and contracts, see how to hire a licensed general contractor in Florida.
What do the license codes mean?
DBPR publishes the codes used for the construction industry (board 06). The certified codes are:
| Code | Category |
|---|---|
| CGC | General contractor |
| CBC | Building contractor |
| CRC | Residential contractor |
| CCC | Roofing contractor |
| CAC | Air conditioning contractor |
| CMC | Mechanical contractor |
| CFC | Plumbing contractor |
| CUC | Underground utility and excavation contractor |
| CPC | Pool and spa contractor |
| CSC | Sheet metal contractor |
| CVC | Solar contractor |
| SCC | Specialty contractor |
| PCC | Pollutant storage systems contractor |
Registered licenses use two-letter codes starting with R, for example RG, RR, RC, RA, and RF. DBPR's code list describes several of the registered general, building, residential, roofing, plumbing, mechanical, and sheet metal codes as limited and non-renewable, so a registered license may be a legacy credential. Check the record rather than assuming.
What can each category do?
Florida Statutes section 489.105 defines the scopes. In plain terms:
- General contractor: no restriction on the type of work that requires a license.
- Building contractor: commercial buildings and residential buildings within a three-story limit, plus remodeling or repair of a building of any size when structural members are not affected.
- Residential contractor: one-, two-, or three-family residences and accessory structures, limited to two habitable stories above no more than one uninhabitable story.
- Roofing contractor: roofing, waterproofing, and related coating work, plus skylights, roof decking, and certain roof-to-wall connections.
- Air conditioning contractors: Class A is unrestricted HVAC work. Class B is limited to systems of 25 tons of cooling and 500,000 Btu of heating each. Class C is servicing only and was closed to new licenses after October 1, 1988.
- Mechanical and plumbing contractors: broader piping and gas work than air conditioning alone, within the scopes the statute lists.
- Underground utility and excavation contractor: main sanitary sewer, water, and storm sewer systems and their lines up to the meter or property line.
- Specialty contractor: limited to one construction phase within a category set by board rule.
The statute splits these into Division I (general, building, residential) and Division II (the specialty trades). A license for one trade does not cover another. A contractor without the right license for part of a job must bring in someone who has it.
What does certified versus registered mean?
DBPR describes certified contractors as holding a state certificate of competency and being able to work in any Florida jurisdiction without meeting local competency rules. Registered contractors registered by meeting the competency requirements of a specific jurisdiction and may contract only there. Section 489.117 adds that a registration covers only the type of work it lists and only the places where the registrant met local rules. One exception exists after a declared natural emergency, when registered contractors may work in the declared area for work covered by their registration.
How do I look up a license?
- Open the DBPR licensing portal (myfloridalicense.com). It offers four search types: by name, by license number, by city or county, and by license type.
- Search the contractor's license number if you have it, since names can be common. Match the business name on your contract to the name on the record.
- Check the status. DBPR's code list uses primary status codes for current, probation, and suspended, and secondary codes for active and inactive.
- Use DBPR's unlicensed activity page to search public complaints against people or businesses that were not licensed when the complaint was made. A separate link covers public complaints against licensed persons.
Section 489.119 requires a contractor's certification or registration number on offers, proposals, bids, contracts, and advertisements (section 489.119). A missing number is a prompt to ask questions, not proof of a problem.
Miami-Dade county licenses
Miami-Dade also licenses certain trades under Chapter 10 of the County Code. The county says it offers 110 license types in four major categories: electrical, mechanical, plumbing, and building and building specialty. The Construction Trades Qualifying Board sets license types and scopes. County licenses run for two years and require 16 hours of continuing education for renewal. To verify a county license, use the Contractor tab at miamidade.gov/building, call the Contractor Licensing Section at 786-315-2880, or dial 3-1-1.
State and county licensing are separate systems. A contractor can hold a state license, a county license, or both depending on trade and location. Ask which license covers your work and look it up in the matching system.
What a lookup does not show
A license record confirms that a license exists and its status. It does not by itself tell you:
- Quality of work or fit for your project. A valid license means the person met licensing standards, not that they are right for your job.
- Insurance in force today. DBPR points to a separate workers' compensation database for coverage status. Ask for a certificate of insurance sent to you directly.
- That the person you are meeting is the license holder. The business license is held through a qualifying agent, the person responsible for supervising the business's contracting activities. Ask who that is.
- Permit history on your street. For that, check the building department's permit records.
DBPR's complaint search also does not describe complaint details or outcomes, so read what is listed carefully and ask the contractor about anything you find.
Work that does not require a contractor license
Section 489.117 says work that does not substantially match a defined contractor category cannot be subjected to local licensing requirements. The statute gives painting, flooring, cabinetry, handyman services, and plastering as examples. That is why not every worker on a job appears in the DBPR search. Work that matches a licensed category, such as roofing, air conditioning, or plumbing, does fall under licensing.
Questions people ask
Does CGC always mean the best choice for a home project?
Not necessarily. A general contractor license has no scope limit, but a residential contractor license can be a fit for a one- to three-family home. Match the license to the work, then evaluate experience, references, and contract terms.
What if the license shows inactive?
Treat the contractor as not authorized to take on licensed work until DBPR shows an active status. Ask the contractor to explain and verify again before signing or paying.
Is a county license the same as a state license?
No. They are issued by different bodies, and their scopes and renewal rules differ. Verify whichever one the work requires.
Check before you decide
- License number looked up yourself, not copied from a card.
- Status active, category matches the work, certified or registered for your location.
- Business name and qualifying agent match your contract.
- Complaint search reviewed.
- Insurance certificate and workers' compensation confirmed separately.
- Miami-Dade or city requirements checked for county-licensed trades.
For a project with several trades, see general contracting. Rules change, so confirm current details with DBPR or the county.
