Skip to main content

Construction size standards and set-aside programs

How SBA size standards and NAICS codes decide whether a contractor is small, what 8(a), HUBZone, WOSB and SDVOSB mean, and how SAM self-representation differs.

By AV Construction Group Corp. Published 7 min read

Illustration for articles about government contracting

A construction business counts as "small" for federal contracting when it falls under the SBA size standard for the NAICS code the government assigns to a contract. In the eCFR table reviewed for this article, most general building and heavy and civil engineering construction codes show a $45 million receipts standard, and most specialty trade codes show $19 million. Small status is something a firm states in SAM.gov. Programs such as 8(a), HUBZone, women-owned and service-disabled veteran-owned set-asides need SBA certification on top of that.

What a NAICS code and a size standard are

NAICS, the North American Industry Classification System, is the numbering system that groups businesses by what they do. Construction sits in sector 23. The SBA attaches a size standard to each NAICS code, measured either in average annual receipts (revenue) or number of employees. Construction standards are receipts-based.

The contracting officer chooses the NAICS code for each solicitation. A business that disagrees can appeal that choice to SBA's Office of Hearings and Appeals, and SBA says the appeal window is 10 days from the solicitation's publication. Because a code and its size standard determine who can compete, it is worth reading the NAICS code on a solicitation before anything else.

How SBA measures size

According to SBA:

  • Receipts are averaged over the latest five completed fiscal years for federal contracting purposes. Firms in business less than five years use a weekly-average method defined by SBA.
  • Employees are averaged over the latest 24 calendar months, counting everyone on payroll regardless of hours or temporary status.
  • Affiliates count. Receipts and employees of affiliated businesses are added to yours. Affiliation turns on the power to control, which can exist with majority ownership and, in some cases, through contractual arrangements.

SBA warns that knowingly misrepresenting size on a federal contract carries severe penalties. Any interested party can also file a size protest against an apparent winner.

Current construction size standards

The table below summarizes the construction rows of the SBA table in 13 CFR 121.201 as shown on the eCFR when this article was prepared, in millions of dollars of average annual receipts. The eCFR is an unofficial, continuously updated copy, and individual codes can carry exceptions, so confirm your own codes in SBA's size standards tool.

GroupExamples of NAICS codesStandard
General building236115 to 236118 (residential), 236210, 236220 (commercial and institutional)$45.0 million
Heavy and civil engineering237110 (water and sewer lines), 237130 (power and communication lines), 237310 (highways and bridges), 237990$45.0 million
Specialty trade contractorsMost 238 codes, including roofing, electrical and plumbing$19.0 million
Other building equipment contractors238290$22.0 million

Some codes, such as land subdivision and dredging, are exceptions with different numbers.

A proposed change is pending

On August 20, 2026, SBA published two proposed rules that would change how size standards are set and would raise many receipts-based thresholds. Comments closed September 21, 2026. A law-firm summary reports that the proposals would, among other things, consolidate roughly 1,000 industry standards into 338 and avoid lowering any existing standard. The text of the proposal says the 2022 standards are unreasonably low for many industries, including construction. I could not confirm the proposed construction figures. As far as I could confirm in mid-October 2026, the proposals are not final, so the current table governs until SBA publishes a final rule. Check SBA's size standards page before you rely on any number.

Set-asides in plain terms

A set-aside reserves a contract for a category of businesses. For acquisitions above the micro-purchase threshold, GSA explains that agencies must set a contract aside for small businesses when they expect offers from two or more responsible small businesses at fair prices. This is often called the "rule of two." FAR 19.502-2 states the default for purchases up to the simplified acquisition threshold.

Some contracts are reserved further, for firms in a specific SBA program. SBA lists goals of at least 23% of federal contracting dollars to small businesses overall, with additional goals for HUBZone, women-owned and service-disabled veteran-owned firms.

The four programs

Each program starts with being small under the size standard for the relevant NAICS code.

8(a) Business Development. For small businesses at least 51% owned and controlled by U.S. citizens who are socially and economically disadvantaged. SBA's page lists personal financial limits (net worth of $850,000 or less, adjusted gross income of $400,000 or less, assets of $6.5 million or less), good character, and potential for success such as two years in business. Participation lasts up to nine years, and a person can use the program once. SBA certifies firms through MySBA Certifications. A final rule published August 11, 2026 and effective September 10, 2026 removed the rebuttable presumption of social disadvantage for individually owned applicants, who must now make the showing described in the rule. It does not require firms already in the program to re-establish it. A law-firm summary reports that SBA had not approved an 8(a) application since August 2025 and expected to resume processing, so check the current status with SBA.

HUBZone. For small businesses at least 51% owned and controlled by U.S. citizens (or certain other eligible entities), with a principal office located in a HUBZone and at least 35% of employees living in a HUBZone. Certification is through SBA, with recertification every three years. SBA provides a map to check addresses.

Women-Owned Small Business (WOSB) and Economically Disadvantaged WOSB (EDWOSB). For small businesses at least 51% owned and controlled by U.S. citizen women who manage day-to-day operations. EDWOSB adds personal financial limits. Firms must apply for certification through SBA to compete for these set-asides. Set-asides are limited to NAICS industries where women-owned firms are underrepresented, and SBA publishes the list, so check whether your codes appear on it.

Service-Disabled Veteran-Owned Small Business (SDVOSB). For small businesses at least 51% owned and controlled by veterans, in this case service-disabled veterans, as identified by the VA. SBA took over certification from the VA on January 1, 2023 through its Veteran Small Business Certification program (VetCert). Certified SDVOSBs can compete for set-aside and sole-source awards government-wide.

Self-representation in SAM versus SBA certification

When you register in SAM.gov, you state whether you are small for each NAICS code, based on the size standards. GSA describes this as a declaration. You are not applying to anyone, and there is no formal certification step for ordinary small business status. That declaration can still be challenged through a size protest.

Certification is different. For 8(a), HUBZone, WOSB/EDWOSB and SDVOSB, SBA reviews documents and decides whether you qualify, and the approval then appears in your SAM.gov profile and SBA's search tools. SBA says it aims to decide complete WOSB and 8(a) packages within 90 days. In plain terms, saying you are small in SAM is a statement; being 8(a), HUBZone, WOSB or SDVOSB is an approval.

Registering first is the starting point: see SAM.gov registration for contractors.

Questions people ask

Does being "small" mean I qualify for set-asides automatically?

For small business set-asides, being small under the NAICS code on the solicitation is the main requirement. Program-specific set-asides also require that program's certification.

Which size standard applies to a mixed project?

The contracting officer assigns one NAICS code per contract, based on the principal purpose of the work. If you think the code is wrong, the appeal window is short.

Do local programs follow the same rules?

No. State and county programs, such as Miami-Dade's, have their own eligibility rules. See federal, state and Miami-Dade construction procurement.

Check before you decide

  • Find your NAICS codes and look up each current standard directly with SBA.
  • Calculate receipts and employees the way SBA does, including affiliates.
  • Decide whether a certification is worth pursuing, and read that program's page on SBA.gov first.
  • Keep SAM.gov size answers current and consistent with your tax records.
  • See /government for the public-sector work context.

Sources

  1. SBA: Size standards
  2. eCFR: 13 CFR 121.201, Size standards by NAICS industry
  3. Federal Register: Small Business Size Standards (proposed rule, August 20, 2026)
  4. Holland & Knight: SBA proposes sweeping overhaul of size standards
  5. SBA: Contracting assistance programs
  6. SBA: 8(a) Business Development program
  7. SBA: HUBZone program
  8. SBA: Women-Owned Small Business Federal Contract program
  9. SBA: Veteran contracting assistance programs
  10. GSA: Programs and eligibility
  11. Federal Register: Final rule on the 8(a) social disadvantage presumption (August 11, 2026)
  12. Holland & Knight: SBA publishes final rule removing the 8(a) presumption of social disadvantage
  13. SBA: Business certifications overview
  14. FAR 19.502-2: Total small business set-asides

Planning a project?

Tell AV Construction Group Corp. about your project and we will follow up.

Keep reading

More guides on the blog