In short: in Miami-Dade and Broward, a roof is built under the strictest wind rules of the Florida Building Code. Before you sign, ask three things: which wind requirements apply to your house, who pulls the permit, and which product approval covers the roofing products. Get the answers in writing.
Why South Florida is different
Florida has one building code for the whole state. But the code does not treat every county the same way. Miami-Dade County explains that Miami-Dade and Broward form the High-Velocity Hurricane Zone, often called the HVHZ. The rest of the state is outside it.
Miami-Dade describes the HVHZ as the area with the most stringent requirements of the Florida Building Code. For a roof, that affects the products that can be used, how they are installed and how the work is checked.
Outside the HVHZ, the code also divides the state by wind. Miami-Dade notes that those areas are split by a wind-borne debris region and by wind-speed lines. So even outside Miami-Dade and Broward, the wind rules depend on where the house is.
Ask about wind
You do not need to learn the code. You need a contractor who knows it and can explain it in plain words. Ask:
- Is my house in the High-Velocity Hurricane Zone?
- Which wind requirements apply to my roof, and where are they written?
- How does that change the way the roof is installed, for example the nailing and the edges?
A good answer names the requirement and the document. A vague answer, like "it is all hurricane proof," is not enough. No roofer can promise how a roof will behave in a particular storm. What a roofer can do is build to the code and to the manufacturer's instructions.
Ask about the permit
A new roof is not a small repair. In Miami-Dade, residential roofing work goes through the county's permitting system. The county even runs an online system where qualified contractors apply for residential roofing permits.
Ask your contractor:
- Who applies for the permit: you or the contractor?
- Which inspections will the job need, and who schedules them?
- Will I get a copy of the permit and of the final inspection?
Be careful if someone suggests skipping the permit. Work without a permit can cause trouble later, when you sell the house, file an insurance claim or need another permit.
Ask about the product approval
Not every roofing product can be used everywhere in Florida. Products need an approval that shows they meet the code.
Florida has a statewide product approval system, set up by state law. Products approved through it are listed on the state's building code website, where anyone can look them up.
Miami-Dade County runs its own approval process through its Product Control section. The county explains that products such as roofing products, exterior doors, windows, shutters and skylights are approved through a Notice of Acceptance, or NOA. The NOA is the document that carries the approval. It gives the information and instructions needed to show code compliance, and it helps with permitting, installation and inspection. State law also names Miami-Dade's Product Control division among the approved product evaluation entities.
For your roof, ask:
- Which approval covers each roofing product: the shingles, the underlayment and the other parts?
- Is that approval valid for use in the HVHZ, if my house is in Miami-Dade or Broward?
- Can I have a copy of the approval, or its number, before the work starts?
Then look it up yourself. The approval documents are public. Our article on Florida product approval and the Miami-Dade NOA shows how to read one.
Ask about the contractor
Rules only help when someone follows them. Before you sign, check:
- The license. Ask for the Florida license number and look it up on the state's license search.
- The insurance. Ask for proof of insurance.
- The product line. Ask which manufacturer and which line will be installed, and whether the contractor is trained on it.
AV Construction Group Corp. is an Owens Corning Preferred Contractor, and our listing shows SureNail and TPRS training badges. That is about the products and how they are installed. The permit, the approval and the inspections are still separate steps, and we explain each one for your job.
What to get in writing
Put the answers in one place:
- The wind requirements that apply, in plain words.
- Who pulls the permit, and the inspections the job needs.
- The approval for each roofing product.
- The products and the parts of the roof system that will be installed.
- The warranty that applies, and who registers it.
Next step
Start with a preliminary estimate online, or request a visit. The final price is confirmed after a site visit, in a formal proposal. Read more on our Owens Corning page, and see our roofing services.
