In Miami-Dade, replacing or substantially repairing a roof generally requires a building permit, a roofing product with a current county Notice of Acceptance (NOA), and inspections at set stages. The county sits in the High-Velocity Hurricane Zone (HVHZ), which has stricter roofing rules than the rest of Florida. A licensed roofing contractor normally pulls the permit; a homeowner can act as owner-builder only under narrow conditions.
Each city in the county can run its own building department, and their checklists differ in details. Treat this article as a map of what to expect, and confirm specifics with the department that covers your address.
Which code applies right now
The Florida Building Code, 8th Edition (2023), took effect December 31, 2023, and is the edition in force as of this writing. The 9th Edition (2026) is scheduled to take effect December 31, 2026. Miami-Dade has announced that permit applications and plans submitted on or after that date must comply with the new edition, and that online applications submitted after 4 p.m. on December 30, 2026 fall under it as well. If your project straddles the change, ask the building department which edition will govern.
The county also published HVHZ roofing updates that took effect January 1, 2024, covering underlayment methods, shingle fastening, tile and metal slopes, and related details.
What the HVHZ means for a roof
The HVHZ chapters of the Florida Building Code add testing and installation requirements for roofing in Miami-Dade. Roofing is reviewed against specific test and application standards (the county calls them TAS and RAS documents) rather than only the general national standards. In practice, that affects:
- Which products can be used, because they must be tested and approved for the zone
- How underlayment, fasteners, edge metal and flashings are installed
- Fire classification of the roof assembly
- Inspection stages specific to each roof type
Product approval: the Miami-Dade NOA
A Notice of Acceptance is the county's document stating that a product or system has been reviewed for Florida Building Code compliance and how it must be installed. Roofing products are among the product categories that need one in Miami-Dade. The NOA lists the approved assembly, limitations and attachment details, so the installer has to follow it.
Practical points from the county's own guidance:
- Miami-Dade's roofing e-permit system asks for a valid county NOA number and states that Florida Building Code approvals are not accepted there.
- For metal roofs, the system rejects expired or superseded NOAs.
- Tile roofs may need NOAs for the tile, the underlayment, and the adhesive or mortar.
- Roofing fasteners and batten plates listed in approved NOAs must come from a corrosion-tested fastener listing program for HVHZ use.
Outside the HVHZ, Florida uses a statewide Product Approval system instead. Because Miami-Dade's system works differently, do not assume a product marketed as "Florida approved" is acceptable in Miami-Dade. Ask for the NOA and read its limitations page.
Who may pull a roof permit
Roofing is a licensed trade in Florida. Section 489.105 treats roofing contractors as a distinct license category whose scope covers installing, repairing, and altering roofing, waterproofing and coating. For Miami-Dade's online roof permits, a contractor creates an account with a county Tradesman number and keeps license and insurance on file. That online route is limited to unincorporated Miami-Dade and to certain roof categories. Commercial re-roofing permits are not available through it.
Homeowners have one other route. Under section 489.103(7), an owner may act as their own contractor for a one- or two-family residence for their own use, but must appear in person, sign a disclosure statement acknowledging legal and financial responsibility, and personally supervise the work. If the structure is sold or leased within one year after completion, the law presumes it was built for sale. Owner-builders cannot hire unlicensed people as contractors. Roofing is hard, dangerous work with strict installation details, and an owner-builder permit does not reduce the HVHZ requirements.
A state law effective July 1, 2026 allows limited permit exemptions for some minor single-family work. The City of Miami's summary of it does not list roofing, and it excludes structural work. Do not assume a roof job is exempt; ask the building department in writing.
What the permit package usually includes
Details vary by city, but Miami-Dade's county documents list items such as:
- A completed HVHZ roof permit form with a roof plan showing dimensions, sections and levels
- The NOA for the roof assembly and any components that need one
- The Miami-Dade Owner's Notification form
- A recorded Notice of Commencement for jobs over $2,500, as stated in the county's e-permit guides
- Fire classification information for the system
- Hurricane mitigation paperwork, such as the roof-to-wall affidavits, where applicable
Some cities also ask for a homeowners association affidavit, proof of workers' compensation or an exemption, and a license verification. Check the checklist of the department that issues your permit.
Roof inspections in Miami-Dade
The county's inspection checklist lists stages by roof type. They include, for example:
- Shingles: an installation inspection, a stage before the underlayment or base sheet is covered, and a final
- Metal panels: an installation inspection and a final, both checking fasteners and installation per the NOA
- Tile: inspections before the base sheet is covered, during cap sheet installation, at tile placement, and a final that includes a static uplift test for adhesive or mortar-set tile
- Built-up roofs: an inspection before the anchor sheet is covered and a final
The checklist says the permit holder is responsible for confirming the work meets code before calling for inspection. The county's e-permit guides add that the permit card and approved documents should be on the job site for the first inspection.
Questions people ask
Do I need a permit to repair a few shingles?
Rules for small repairs vary, and the 25% roof rule can matter. See repair or replace a roof in Florida. Ask the building department before work begins.
Can a contractor use a Florida Product Approval in Miami-Dade?
For roofing in the county's e-permit system, no. The system asks for a Miami-Dade NOA.
What if a contractor says no permit is needed?
Treat it as a warning. Florida's DBPR cautions that skipping permits can make a home hard or impossible to sell later, and permit and inspection records are also how roof age and code compliance are proven.
Check before you decide
- Ask for the NOA numbers and read the limitations page for your roof.
- Confirm the contractor's DBPR license type and the permit holder's name.
- Ask which code edition and which building department apply.
- Keep copies of the permit, approved plans and final inspection.
To plan costs, see what drives roof replacement cost in Miami-Dade. Requirements change, so confirm them with your building official.
