Skip to main content

Roof replacement cost in Miami-Dade: what drives the price

What changes the price of a roof replacement in Miami-Dade, which line items to look for in each estimate, and how to compare bids fairly.

By AV Construction Group Corp. Published 6 min read

Illustration for articles about roofing

Roof replacement prices in Miami-Dade depend mostly on roof size and complexity, the type of roof covering, what is found under the old roof, and the code-required layers and details that go with a permitted job. Two estimates can differ by a wide margin simply because they cover different scopes. The most reliable way to compare bids is to line up the same items side by side, not to compare the bottom-line number.

This article does not quote dollar figures. Local prices move with material costs, labor and the season, and a single "per square foot" number rarely fits a real roof. If you want a starting point for the size of your roof, the satellite roof measurement tool can give you an area to share with contractors.

What drives the cost of a roof replacement

Size, slope and complexity

The roof's total area is the base of every estimate. Complexity adds labor: more hips, valleys, dormers, skylights and separate roof sections mean more flashing and more cutting. Steeper slopes and taller buildings are slower and need more safety equipment. Miami-Dade's own e-permitting rules set limits by slope and mean roof height for different roof categories, which is a reminder that the roof's geometry affects what can be installed and how.

Ask each contractor which area they measured and in what units. Roofers often price by the "square" (a unit of roof area), while the county's permit system asks for total square feet. A bid built on a different measurement is not directly comparable.

The roof covering you choose

Shingle, tile, metal and low-slope membrane systems all carry different material and labor costs, and each has its own installation method. In Miami-Dade, roofing products need a county Notice of Acceptance (NOA), and the county does not accept a Florida Product Approval in its roofing e-permit system. That narrows the product list compared with other parts of Florida. For a side-by-side look at the materials, see tile, metal, shingle and flat roofing in South Florida.

Tear-off, deck repair and re-nailing

A replacement starts by removing the old covering. What is underneath then decides the next steps. Rotted or damaged sheathing has to be replaced, and that is usually priced per sheet or per square foot as an add-on because nobody knows the amount until the deck is exposed.

Florida law also builds in mitigation work. Under section 553.844 of the Florida Statutes, a roof replacement on a site-built single-family home must include a secondary water barrier and strengthened roof-deck attachment. That means extra fasteners on the deck and a code-compliant sealed underlayment, so these items belong in every legitimate estimate for a house.

Underlayment and the secondary water barrier

Miami-Dade's HVHZ roofing rules describe three accepted ways to build the underlayment for shingle, metal and similar roofs: a fully self-adhered layer, taped deck joints with a code-approved underlayment over them, or two layers of nailable underlayment. The methods cost different amounts, and the approved product list for your system may limit your choice. Ask which method is in the bid.

Flashing, drip edge and penetrations

Edge metal, wall and chimney flashing, vent and pipe boots, and skylight curbs are small items that cause many leaks. Miami-Dade's roofing code summary lists minimum dimensions for drip edge, for example. Good estimates itemize these, or at least say they are replaced rather than reused.

Roof-to-wall connections

For some homes, a roof replacement must also improve the roof-to-wall connections. The statute applies this to buildings in the wind-borne debris region with an insured or assessed value of $300,000 or more, and Miami-Dade publishes owner exemption and contractor retrofit affidavit forms tied to it. If your home falls under this rule, the retrofit is a separate cost line. Do not assume it is included.

Permit, inspections and administrative costs

A permitted job involves permit fees, a recorded Notice of Commencement for larger jobs, and inspections at set stages. Miami-Dade's e-permit guide notes that permit fees are based on total roof area. Ask whether the bid includes permit fees and who handles them.

How to compare roofing estimates

A useful comparison covers the same items in each bid. Ask every contractor to put the following in writing:

  1. The roof covering by manufacturer, product name and NOA number
  2. Whether the old roof is torn off or covered over, and why
  3. How rotted decking will be priced if found
  4. The underlayment method and secondary water barrier
  5. Deck re-nailing, roof-to-wall work if applicable, and who certifies it
  6. Flashing, drip edge, vents and penetrations
  7. Permit fees, inspections, debris removal and protection of landscaping
  8. Warranty terms, including what would void them
  9. Start date, completion date and payment schedule

NRCA, the national roofing trade association, advises asking for a written proposal with detailed specifications, dates and payment terms, reading the warranty carefully, and not choosing on price alone.

Florida law limits what can be asked up front. If a contractor takes an initial payment of more than 10 percent of the contract price for residential work, the contractor generally must apply for permits within 30 days and start within 90 days after permits issue, unless there is just cause or a written agreement. Ask a construction attorney about how this applies to your contract.

If insurance is involved

When the roof work follows an insurance claim, Florida's section 489.147 requires a good-faith, itemized estimate before a repair agreement and bars contractors from offering rebates or deductible waivers. It also restricts contractors from interpreting your policy or acting as your adjuster. Contact your insurer or a licensed public adjuster for coverage questions. This article does not give insurance advice.

Questions people ask

Why are roofing estimates so different from one another?

Usually the scopes differ. One bid may include deck repair allowances, a sealed underlayment, new flashing and permit fees, while another leaves them out or lists them as extras. Compare line by line before comparing totals.

Is the lowest bid a red flag?

Not automatically, but NRCA cautions that an unusually low price deserves questions. Find out which items were left out, whether the contractor is licensed, and how change orders for rotted decking will be handled.

Can I get a firm price before the old roof is removed?

You can get a firm price for the known scope. Hidden damage, mainly to the sheathing, is normally handled through unit prices or an allowance. Ask for those unit prices in writing.

Does a new roof lower my insurance premium?

Some insurers consider roof features through a wind mitigation inspection, but discounts depend on the insurer and the policy, and nothing is guaranteed. See wind mitigation inspections and roof features.

Check before you decide

  • Verify the contractor's license on the Florida DBPR website and confirm it is a roofing license.
  • Get at least two itemized, written proposals that list the product NOA numbers.
  • Confirm who pulls the permit, and that it is pulled before work starts.
  • Ask what happens if decking is damaged, and get unit prices.
  • Read the warranty and the payment schedule before signing.

For more on permits, read roof permit and product approval requirements in Miami-Dade. Codes and statutes change; confirm current requirements with your building department.

Sources

  1. Florida Statutes s. 553.844 - Windstorm loss mitigation; requirements for roofs and opening protection
  2. Miami-Dade County - 2023 FBC roofing code changes (HVHZ)
  3. Miami-Dade County - Roofing e-permitting system guidelines
  4. Florida Statutes s. 489.126 - Moneys received by contractors; contractor's lien
  5. Florida Statutes s. 489.147 - Roof repair or replacement; insurance claims and contracts
  6. NRCA - Selecting a roofing contractor

Planning a project?

Tell AV Construction Group Corp. about your project and we will follow up.

Keep reading

More guides on the blog